Using the vaporizer: How to get RELICT most out of your RELICT – right from the very first use!
Using a vaporizer correctly is easy. Our RELICT in particular is very simple to operate thanks to its intuitive 3-button control and user-friendly dosing capsule system.
Nevertheless, there are a few very important things to keep in mind when using a vape, which even advanced vapers sometimes forget; this includes, above all, sterilizing the new vaporizer before using it for the first time.
In order to provide both beginners and professionals with all the important information they need, we have RELICT compiled all the essential application instructions for RELICT . We hope you enjoy reading and find it informative!
Before first use: Sterilization of the RELICT
With any vaporizer, it is possible that residues from production agents and chemicals may remain in the device. For your health and to ensure unrestricted vaping enjoyment, it is therefore important that you sterilize every new vaporizer before using it for the first time. This also applies to our RELICT , of course.
- Turn on the vaporizer.
- Set the highest possible temperature (240°C).
- Set the maximum session time (6 minutes)
- The RELICT now RELICT up to the maximum temperature quite quickly. Allow the vaporizer to heat at this temperature for approx. 15 minutes.
- Stay with RELICT the entire time. If it switches off automatically, switch it back on so that it heats continuously for as long as possible during the 15 minutes.
- After 15 minutes, your RELICT is ready for use.
Filling and vaping with the RELICT
The RELICT at temperatures between 160 and 240 °C. With this temperature range, the RELICT is RELICT suitable for vaporizing all herbs, as not every herb vaporizes within this temperature range.
The RELICT is ideal RELICT consuming cannabis, as most of the important substances contained in cannabis vaporize between 185 and 210 °C. The remaining substances in cannabis vaporize between 160 and 240 °C, which still makes the RELICT perfect RELICT enjoying cannabis. In addition to cannabis, you can vaporize herbs such as valerian, ginseng, and guarana with the RELICT optimal conditions.
Before purchasing herbs, you should ensure that they can be vaporized within the temperature range of the RELICT . Weigh the herbs using a precision digital scale, as the RELICT herb chamber RELICT dosing capsules can hold a maximum of 0.3 grams of crushed herbs. Once you have weighed the herbs, proceed as follows:
- Grind the herbs. To ensure that the vaporizer works properly, it is important that the herbs are ground to the optimum consistency. To achieve this, it is best to grind the herbs in one of our grinders.
- Next, remove the cooling unit to gain access to the herb chamber located underneath it.
- Now gently place the ground herbal material into the herb chamber or your dosing capsules. Be careful not to press the herbs in too tightly, as this would impair the vaporization process. It is best to use our filling tool.
- If you are using dosing capsules, first fill the herbs into the dosing capsules and then place the dosing capsules in the herb chamber. If you filled the herb chamber directly in the previous step, this fourth step is not necessary.
- Finally, after either filling the herb chamber or placing a filled dosing capsule in the herb chamber, replace the cooling unit.
Next, turn on the vaporizer. To do this, press the large power button 5 times in succession. The Relict will now start to heat up automatically. If you want to vaporize at a different temperature than the one set or want a different session duration, press the large button (power button) five times until the temperature or session display appears. Then use the small buttons to set the desired temperature or session duration and let the RELICT heat up.
Once your desired temperature has been reached, place your lips around the mouthpiece and take your first drag. Enjoy your vaping experience! Very practical: as soon as you put the mouthpiece to your lips and take a drag, the integrated Intellisense sensors detect that you are using the RELICT. The sensors then give the heating elements an extra boost so that you get denser vapor – making vaping even more enjoyable!
Important information about using your vape
Regular maintenance
As high-quality as the vapor from the RELICT may be RELICT each session, keep in mind that the vapor will only taste good in the long run and the RELICT will only function well RELICT if you clean your vaporizer regularly. For this reason, you will find a how-to article on cleaning the vaporizer on our website. Please read this article carefully.
Recommended accessories
You can use the RELICT than those described here. Various accessories are available for this purpose, which we present on this page.We would particularly like to highlight the Black Aroma Glass Tube, which you can use as an extended mouthpiece and which gives you a cooler and smoother vapor. Our bubbler has a similar effect, only much stronger, and we can also recommend using it.
The absolute basics: explanation of the 3-button operation
The RELICT has three buttons. Above the display, there is a large button that you can use to turn the device on and off and to switch between options. The two smaller buttons below the display are used to precisely adjust the temperature, session duration, and other settings.
Is the explanation too complicated? Then let's make it a little clearer here:
- To turn on your RELICT , press the large power button 5 times in succession. Follow the same procedure to RELICT the RELICT .
- Let's assume that your RELICT is RELICT and you now want to make changes to the temperature or session duration:
- Press and hold the large power button for a few seconds to choose between temperature and session time.
- Now you can use the small buttons at the bottom to change the temperature precisely in 1°C/1°F increments.
- Or configure the session time in 30-second increments within a range of 180 seconds to 360 seconds.
- You can also easily change the temperature unit from Celsius to Fahrenheit by pressing and holding the power button and the left arrow for a few seconds.
- If you want to use the Relict with the bong adapter on a bong, you can rotate the display 180°. To do this, press and hold the power button and the small button with the arrow pointing to the right for a few seconds. This allows you to comfortably read the data on the OLED display, even when the Relict is Relict in the bong.
The RELICT is operated RELICT three buttons. In principle, it is very intuitive to use. RELICT switching on, the RELICT automatically heats up to the temperature you have set.